IsoFlex SE at a glance
Pressure injuries can begin in as little as the first two hours* of a patient’s admittance into a clinical setting. They pose a serious threat and should be treated as such. Our premier stretcher surface, IsoFlex SE, addresses the key risk factors to skin breakdown: pressure and shear. In doing so, IsoFlex SE enhances patient comfort and aids in the treatment and prevention of pressure injuries.
- ShearGel technology
- CoreGel technology
- Slip resistant bottom
- Durable cover
- Welded seams
Product features
Premium shear management
Stryker’s premier stretcher surface, IsoFlex SE, addresses the key risk factors to skin breakdown: pressure and shear. In doing so, IsoFlex SE enhances patient comfort and aids in the treatment and prevention of pressure injuries.
Innovation. Inside and out. Experience the value of gel technology.
It’s true: Pressure injuries can begin in as little as the first two hours* of a patient’s admittance into a clinical setting. They pose a serious threat and should be treated as such.
With the aforementioned knowledge of the severity of pressure injuries in mind, we designed IsoFlex SE with specific features to aid in treatment and prevention. Most important of these features, is gel.
A ShearGel
B CoreGel
C Sloped heel section
ShearGel Technology
Featuring only-in-class ShearGel, IsoFlex SE was designed to help minimize the friction between the surface and the patient. Its technology offers a layer of support so IsoFlex SE can move freely with patient movements.
CoreGel Technology**
Located in the sacral region, CoreGel creates a positioning pocket to help prevent patient migration1. Its design helps absorb and redistribute patient weight to aid in pressure redistribution.
Sloped heel section
IsoFlex SE features a sloped heel section to further address our commitment to pressure injury prevention by helping reduce the risk of heel breakdown.
Our cover story
Bringing preventative cover features to the surface.
In line with our commitment to aiding in proactive prevention, we designed the cover of IsoFlex SE with specialized features intended to make it more durable and effective at infection control.
It was engineered for ease of use, especially during the maintenance and care process. Its cover is made with a durable Dartex material for increased chemical resistance.
A Welded seams
B Slip-resistant bottom
C Three-sided zipper
Slip-resistant bottom
IsoFlex SE features a slip-resistant bottom to help improve infection prevention through the elimination of Velcro while maintaining affixation to the stretcher during patient movement and transfers.
Welded seams
IsoFlex SE features RF welded seams that utilize electromagnetic bonding to limit fluid ingress and infiltration.
Three-sided zipper
Three-sided zipperCaregivers can fully inspect the condition of internal components of their stretcher surface with IsoFlex SE’s three-sided zipper.
Interested in learning more? Contact an expert.
Thanks!
*Stop them at the Door; Should a Pressure Injury Prevention Protocol be Implemented in the Emergency Department, J WOCN, 2010.
**This product is made with Intelli-Gel® hollow column configuration. “Intelli-Gel®” licensed from EdiZONE, LLC of Alpine, UT
1. Best when used in combination with a stretcher equipped with Lift Assist Backrest.
MKT LIT-2018 26 JUN 2020 REV A