Synchro SELECT™ Guidewires
Excellence comes down to the wire
_____________________________________
Synchro SELECT Guidewires are the Synchro Guidewires you trust, fully optimized.
Based on years of partnership with our customers, we understand that neurointerventional procedures now require access to distal tortuous anatomy, and that guidewires need to navigate with greater ease and control. That’s why we created Synchro SELECT Guidewires.
Tip-to tail upgrades to our nitinol hypotube and stainless steel core wire have led to improved tip shape retention, tip softness, and overall enhanced control to make navigating distal easier.
Since Synchro launched, it has been the market leader for guidewires. Synchro SELECT is the guidewire you trust, fully optimized.
A) Conventional guidewire - Torque transmission
B) Synchro Guidewire - Torque transmission
OFF CENTER GEOMETRY
Synchro SELECT Guidewire has a unique off-center cut pattern in the hypotube compared to a center aligned cut pattern on Synchro2 Guidewire. The new cut pattern allows for a softer tip that is easier to shape and balances the shape memory properties of the nitinol hypotube, resulting in better tip shape retention for improved distal navigation.
REVERSE HELIX PATTERN
Synchro2 - 1 directional helix
Synchro SELECT - reversing helix
With the Synchro SELECT Guidewire family, you can get wherever you need to go on a comprehensive .014" platform.
STIFFNESS PROFILE
Pre-shaped guidewires
45-degree pre-shaped tip
Heat-set to give initial shape.
Shapeable tip
Refine your shape for optimal
vessel selection and navigation.
Specifications
| UPN | Description | Length |
| SSFT215STR | Access Length, Soft | 215cm |
| SSFT215PRE | Access Length, Soft Pre-Shaped | 215cm |
| SSFT300STR | Exchange Length, Soft | 300cm |
| SSFT300PRE | Exchange Length, Soft Pre-Shaped | 300cm |
| SSTD215STR | Access Length, Standard | 215cm |
| SSTD215PRE | Access Length, Standard Pre-Shaped | 215cm |
| SSTD300STR | Exchange Length, Standard | 300cm |
| SSTD300PRE | Exchange Length, Standard Pre-Shaped | 300cm |
| SSUP215STR | Access Length, Support | 215cm |
| SSUP215PRE | Access Length, Support Pre-Shaped | 215cm |
| SSUP300STR | Exchange Length, Support | 300cm |
| SSUP300PRE | Exchange Length, Support Pre-Shaped | 300cm |
OD: 0.014in (0.36mm)
Distal wire segment: 35cm
Compatibility
Microcatheter compatibility: 0.016in (0.41mm)
* As compared to Synchro²
All photographs taken by Stryker. All videos taken by Stryker.
Stryker or its affiliated entities own, use, or have applied for the following trademarks or service marks: Stryker, Synchro, Synchro², Synchro SELECT. All other trademarks are trademarks of their respective owners or holders.
The absence of a product, feature or service name, or logo from this list does not constitute a waiver of Stryker’s trademark or other intellectual property rights concerning that name or logo.
This document is intended solely for the use of healthcare professionals.
A physician must always rely on his or her own professional clinical judgment when deciding whether to use a particular product when treating a particular patient. Stryker does not dispense medical advice and recommends that physicians be trained in the use of any particular product before using it in a procedure. The information presented is intended to demonstrate the breadth of Stryker product offerings. A physician must always refer to the package insert, product label and/or instructions for use before using any Stryker product. Products may not be available in all markets because product availability is subject to the regulatory and/or medical practices in individual markets. Please contact your Stryker representative if you have questions about the availability of Stryker products in your area.
Copyright © 2021 Stryker
AP003458 v1.0